Product Description
The BrewEasy™ is a revolutionary new ultra-compact and economical all-grain brewing system. This patent pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS™ or K-RIMS™ process for short. This system is very simple to use and is a very approachable way to transition from extract to all-grain brewing. The BrewEasy™ system eliminates the need for a sparging, simplifying the process and saving time.
The BrewEasy™ provides all the simplicity of a traditional no-rinse brew-in-a-bag (BIAB) system, but offers the ramping capability of a traditional RIMS system, eliminates the messy and unsafe lifting of hot grains, and provides better wort clarity than BIAB.
Already a Blichmann Engineering BoilerMaker™ owner? Awesome! The BrewEasy™ is modular in nature so you only buy what you need!
How does it all work? This two kettle K-RIMS™ system eliminates the hot liquor tank of a traditional three tier system as well as the time consuming and somewhat complicated sparging process. While a three tier system is still the most versatile and efficient, the BrewEasy™ offers improved efficiency over traditional no-rinse BIAB while eliminating the lifting of hot grains. The recirculation through the mash bed generates super clear wort.
Simply start with ALL of your brewing water (liquor) for your brew day and place about half in the lower kettle (boil kettle) and the remainder in the upper kettle (mash tun). Set your AutoSparge™, turn on the pump and add heat. The liquor will recirculate from the boil kettle, into the mash tun, and back into the boil kettle. When the liquor has reached the dough in temperature, turn off the pump and add your malt. Ramping through several temperature rests is as easy as turning on the burner! When you're through with your mash, simply turn off the pump and let all the wort from your mash tun drain into your boil kettle and boil as normal. It's as simple as that!
Power Requirements
The 240V model requires an input voltage between 208VAC - 240VAC, and a minimum of 30A Ground Fault Circuit Interrupt (GFCI) protected service. The 120V model requires an input voltage of 120VAC and 20A GFCI protected service. If you are uncertain about the electric specifications and your setup, contact a licensed and qualified electrician familiar with National Electrical Code standards and requirements.
The list below shows all the items included as standard in a BrewEasy™ turnkey system. If you already have one or more of these components it is more economical to order your system "a-la-carte". Also shown is a list of optional items you may choose to add to your turnkey system. Be sure to read through the How to Buy tab first so you understand a bit more about how a BrewEasy™ all-grain brewing system is configured.
STANDARD ITEMS IN TURNKEY SYSTEM:
BoilerMaker™ boil kettle (lower pot)
BoilerMaker™ mash tun (upper pot)
False bottom for mash tun
AutoSparge™ for mash tun
Adapter lid kit
Heat source (TopTier™ burner or BoilCoil™ sized for boil kettle)
March 815 pump
TOWER of POWER™ controller (gas or electric)
TOWER LTE™ Control Module stand
|
Batch Size |
Mash Tun (upper kettle) |
Boil Kettle (lower kettle) |
|
5 gal (19 L) |
7.5 gal |
10 gal |
|
10 gal (38 L) |
15 gal |
20 gal |
|
20 gal (76 L) |
30 gal |
30 gal
|
The BrewEasy is dropped shipped from the manufacturer. Allow 1 to 3 weeks for delivery
